Cuts a perfect 2.625 inch diameter circle for use with our 2-1/4 inch Button Machines and 2-1/4 inch Button Parts.
Our graphic punches are just like a big hole punch. You print a sheet
of circles (i.e. your button designs), cut them into strips, then feed
the strips through the graphic punch one at a time. The opening in the
top allows you to line the circle up perfectly. Once your image is lined
up, you push the lever down to cut the paper, then push the center of
the hole up from the bottom (theres a little piston that slides up) and
it ejects the circles out the top. With some practice, you can cut up to
5 strips at a time using 5 mil. paper (However, this is not guaranteed.
Only 1 layer at a time is advised by the manufacturer for accurate