Refrigerator Magnet Making Supplies 58mm

58mm Magnet Supplies

Write a Review

Your Price: $45.00

Complete refrigerator magnets 58mm
NOT Compatible with ProMakers, MultiMakers, Tecre, or other US Manufactured machines
Compatible with metric machines and Badge A Minit
Mylar is 70mm round and 3mil
Magnets are 1-7/8 inch in diameter
Weighs 32 lbs per 1,000

Is My Button Maker Compatible?

Questions about this item? Ask here.

Part Number: 58mmmagnets

Shipping Included

Package Count *

Quantity

Description
Questions and Answers
Design Templates

Get started making your own magnets today! These magnet supplies contain everything you need to make your own refrigerator magnets in a 58mm press. These are NOT compatible with the equipment we carry. These are made for use in metric machines.

Q: If I've gotten the 58mm pinback button samples and they worked with my machine, does that mean that the 58mm magnet supplies will definitely work as well?

Asked by: Kourtni - 2/5/2025

A: Our 58mm magnet backs and button backs are the same diameter, yes. We assume if your machine works with our pinned backs, it will work with our magnet backs too. If you have trouble with our metal backs in imported dies, it's often because the backs sit too low in those dies. You may just need to put a couple of washers or a gasket inside die B, so that the backs sit up high enough in the die to crimp properly.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Becky (2/5/2025)

Submit an answer

Q: We have a machine from vevor. Will these work? 58 mm

Asked by: Marlene - 12/11/2024

A: These are the correct diameter to fit in 58mm vevor dies. However they sit a little lower in the die than the plastic pinned backs. You may need to use washers or a gasket inside Die B to get your metal backs to sit at the right height to crimp in your machine. Most vevor dies come with these inserts.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Becky (12/11/2024)

Submit an answer

Q: Hi! Do you know if these are compatible with an Vevor 58 mm button maker. Best, Viktor

Asked by: Viktor - 10/31/2024

A: Yes. they are the correct diameter for Vevor machines, but those dies are made for use with thicker plastic pinned backs, so you sometimes have to use washers inside die B to get the metal backs to sit at the right height to crimp in the machine.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Becky (10/31/2024)

Submit an answer

Q: Hi there. ?? Would you know if this would work with my Vevor machine? It is 2 1/4 inches (58mm). I can send you more info. I am not finding a model number. Thank you.??

Asked by: Sue - 5/26/2023

A: Hello. Vevor machines are made by a ton of different factories in different styles, so it's impossible to give a guarentee. These parts fit 58mm chinese manufactured dies, however most of those machines are tooled to work with the thicker plastic backs. In order for them to work with thinner metal backs, you have to insert a gasket or washer or risers into die B to get the backs to sit up a little higher in the die. Sometimes these come with the dies, but not always. Check the Becky Buttons YouTube channel for a video on how to make chinese dies work with metal suppies.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Becky (5/26/2023)

Submit an answer