3Compatible with Standard 1-1/4 inch button parts.
4 This is a Badge-A-Minit brand machine. We no longer carry supplies for this machine in the 2-1/4 or 3 inch size. But the 1-1/4 inch standard size should work.
Mostly** compatible with standard parts in the following sizes:1" Buy Here1-1/4" Buy Here1-1/2" Buy Here 1-3/4" Buy Here2" Buy Here 2-1/4" Buy Here2-1/2"Buy Here3" Buy Here3-1/2" Buy Here
**Our mylar 1/64th of an inch smaller than the mylar originally made for this machine. You can get away with using our parts and mylar in this machine for the most part. However if you are using thicker paper in this machine you are more likely to experience problems with our parts.
This is a Mr. Button machine. It comes in the following sizes: 1-5/8", 2-1/3", and 3-1/8" We do not carry parts that are compatible at this time.
This machine came from "somewhere in Canada" and does not appear to work with our standard 1 inch parts. We are not sure about any other sizes. if you happen to have this machine in sizes other than 1 inch, please contact us for samples.
11This also uses metric parts that we do not carry. This machine looks almost exactly like the machine pictured to the left, only it is really light weight, does not have a brand named stamped on it, and lacks a stopping mechanism that makes lining up the dies quite a chore.
This machine came into the shop broken, so we weren't able to do a proper test, but it appeared to work with the 2-1/4 Badge-A-Minit parts. It is on a wooden base and has the following on the label:
GD EnterprisesHank Marine "The Button Man"Bothell WA