Oval ProMaker Punch

The Model c2332 cuts an oval shape for use with our 1-3/4x2-3/4 inch Oval Button Machine and parts.

Our oval paper punches are just like a big hole punch. You print a sheet of graphics (i.e. your button designs), cut them into strips, then feed the strips through the oval hole punch one at a time. The opening in the top allows you to line the circle up perfectly. Once your image is lined up, you push the lever down to cut the paper, then push the center of the hole up from the bottom. With some practice, you can cut up to 5 strips at a time using 5 mil. paper (However, this is not guaranteed. Only 1 layer at a time is advised by the manufacturer for accurate cut).