Shop by Size
Blank refill button supplies compatible with US manufactured button makers
1 inch | 1.25 inch | 1.5 inch | 1.75 inch | 2 inch | 2.25 inch | 2.5 inch | 3 inch | 3.5 inch | 6 inch | 0.875 inch | 1" Square | 1.5 Square | 1.75x2.75 rectangle | 2x3 rectangle | Oval
Refill button supplies compatible with metric size button makers
25mm | 32mm | 37mm | 58mm
2-1/4 Badge-A-Minit | 1-1/4 Badge-A-Minit
Button making supplies are not created equal! If you are not sure what size you should get for your machine, please text a photo of your machine to 314-329-7088 to see if we can help. Here at ButtonMakers we carry genuine US manufactured button making supplies that are compatible with the ProMakers and MultiMakers that we sell as well as most other US made equipment. If you got your machine from elsewhere, the 2.25 inch supplies that we have may not work with your machine, even if it was sold as a 2.25 inch machine and even if you measured it.
In the US we use inches as measurements for our button machines and supplies. This worked out fine for years. Then Amazon came along and all these metric machines started coming in from China. These are often marketed and sold as 1 inch or 1.25 inch to cater to American customers, but they are not quite the same size as the button parts that we had been making here in the US for years. To complicate things a bit further there are so many different manufacturers out of China that make machines that look EXACTLY like machines made by other companies. But the specs are just the tiniest bit different. This makes it so that even with the most thorough testing, we can't offer a guarentee that our metric supplies are going to work in every single Chinese made machine. We are happy to send you samples first if you'd like to test our supplies out in your equipment.
If you have a 1.25 inch (1-1/4) or 32mm size machine, you're in luck! The inches to millimeter conversion on this size is so close you can probably get away with using either US or metric size. Everyone else though, you've been warned!!
- ProMaker
- MultiMaker
- Tecre
- American Button Machines
- USA Buttons
- Badge Parts
- Niel Enterprises
1 inch | 1.25 inch | 1.5 inch | 1.75 inch | 2 inch | 2.25 inch | 2.5 inch | 3 inch | 3.5 inch | 6 inch | 0.875 inch | 1" Square | 1.5 Square | 1.75x2.75 rectangle | 2x3 rectangle | Oval
Refill button supplies compatible with metric size button makers
- Badge-A-Minit
- Mophorn
- Yescom
- Vevor
- Beamnova
- Any other rando machine you got off Amazon
25mm | 32mm | 37mm | 58mm
2-1/4 Badge-A-Minit | 1-1/4 Badge-A-Minit
Button making supplies are not created equal! If you are not sure what size you should get for your machine, please text a photo of your machine to 314-329-7088 to see if we can help. Here at ButtonMakers we carry genuine US manufactured button making supplies that are compatible with the ProMakers and MultiMakers that we sell as well as most other US made equipment. If you got your machine from elsewhere, the 2.25 inch supplies that we have may not work with your machine, even if it was sold as a 2.25 inch machine and even if you measured it.
In the US we use inches as measurements for our button machines and supplies. This worked out fine for years. Then Amazon came along and all these metric machines started coming in from China. These are often marketed and sold as 1 inch or 1.25 inch to cater to American customers, but they are not quite the same size as the button parts that we had been making here in the US for years. To complicate things a bit further there are so many different manufacturers out of China that make machines that look EXACTLY like machines made by other companies. But the specs are just the tiniest bit different. This makes it so that even with the most thorough testing, we can't offer a guarentee that our metric supplies are going to work in every single Chinese made machine. We are happy to send you samples first if you'd like to test our supplies out in your equipment.
If you have a 1.25 inch (1-1/4) or 32mm size machine, you're in luck! The inches to millimeter conversion on this size is so close you can probably get away with using either US or metric size. Everyone else though, you've been warned!!