Q: I need the machine and the cutter without hardware, what is the cost?

Asked by: Angelica - 11/20/2024
A: You can view the current price for a model 100 here: buttonmakers.net/1-inch-Tecre-Button-Machine_p_31.html
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky Buttons (11/21/2024)

Q: What thickness of paper is best for this set up? Is lightweight watercolor paper possible?

Asked by: Lisa Schramek - 9/8/2024
No Answers have been submitted yet.

Q: Just found the site and wondering about the turnaround and ship time for a 1” kit (including cutter etc). Thanks!

Asked by: Justin - 2/11/2024
A: Orders are shipping in 2-3 days and take up to 4 days in transit with the free shipping method depending on where you are located.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Becky (2/12/2024)

Q: Hi Button Makers! Could we swap out the punch cutter in the Tecre 1" kit for the adjustable rotary cutter option? Thanks, Ryan

Asked by: Ryan - 3/22/2023
A: Yes! Just email [email protected] and we will make a custom kit for you!
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky (3/22/2023)

Q: When I went to check out it was said there was a potential delay. Any estimates on that currently?

Asked by: Alias - 2/1/2023
A: There are no delays currently on 1 inch machines or supplies
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky (3/22/2023)

Q: When I went to check out it was said there was a potential delay. Any estimates on that currently?

Asked by: Bode - 12/13/2022
A: The delay does not apply to 1 inch supplies or equipment at this time.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky (12/13/2022)

Q: Hey, do you ship to the UK? Thanks

Asked by: Lee - 9/18/2022
A: Yes
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky (12/13/2022)

Q: Is the design software a CD or a download? Is there a monthly cost?

Asked by: Amber - 8/13/2021
A: you can access our online design tool at designer.buttonmakers.net. It requires an internet connection. It is not a download or available on CD. It is free to use at this time.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Becky (9/19/2022)

Q: Is the design software free with purchase forever or is it subscription based? Thank you!

Asked by: Melbourne Public Library - 6/8/2021
A: The design app is free and available to everyone at this time with no purchase necessary.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Becky (8/13/2021)

Q: Can this machine only be used to created one inch buttons or can I purchase different sizes dies and switch them out using this same machine? Or does each size button require the purchase of an entirely new machine?

Asked by: Just Getting Started - 12/14/2019
A: You cannot change out the machines in the ProMakers. You would need to buy new machine to do another size. The MultiMakers do have changeable dies however, if that's what you're looking for, head on over to the MultiMaker section of the site.
Was this answer helpful?  3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Rebecca (12/16/2019)

Q: This says it includes 500 supplies, does that include the circles and plastics?

Asked by: Rene Clark - 1/5/2018
A: Yes. 500 Button Supplies means that it includes everything you need to make 500 buttons. That's 500 shells (fronts), 500 collets (backs), 500 lockpins, and 500 mylar (plastic covers).
Was this answer helpful?  6 of 7 Customer(s) found this Answer helpful.
Answer provided by: Rebecca (1/5/2018)